Adjusting Selector Lever (GA6L45R) AWD

24 00 018 - Adjusting selector lever (GA6L45R) AWD





Note:
Check cable for ease of movement.
Move selector lever to "P" position.





Grip clamping sleeve (1).
Loosen nut (2).
Press selector lever (3) forward into park position. Press cable (4) in direction of arrow, then release again.
Grip clamping sleeve (1).
Tighten nut (2).
Tightening torque, 25 16 2AZ [1][2]Shifter A/T.





Installation:
Move selector lever to "P" position.
Check whether parking gear is engaged by turning propeller shaft.