Removing and Installing/Replacing Left or Right Front Brake Caliper

34 11 519 - Removing and installing/replacing left or right front brake caliper





Necessary preliminary tasks:
- Remove wheels Removing or Installing Front or Rear Wheel.
After completing work: Bleed braking system Bleeding Brake System with DSC





Press clutch pedal down to floor and secure with pedal support.

Note:
The pedal support may only be released when the brake lines are reconnected.
This prevents brake fluid from emerging from the expansion tank and air from entering the system when the brake lines are opened.





Important!
Grip brake hose at square drive to prevent connecting piece from turning in retaining bracket.

Disconnect brake hose from brake line (1).

Installation:
Tightening torque 34 32 1AZ 34 32 Brake Lines.

Important!
Make sure the retaining clip is correctly fitted.

Remove retaining clip (2) and pull brake hose out of holder.

Detach brake hose (3) from brake caliper.

Installation:
Tightening torque 34 32 2AZ 34 32 Brake Lines.





Release screws (1) and remove brake caliper.

Installation Note:
Tightening torque 34 11 2AZ 34 11 Front Brake.