67 61 515 Replacing Drive With Gear (Front) For Actuating Slide/Tilt Sunroof (Panorama Glass Sunroof)

67 61 515 - Replacing drive with gear (front) for actuating slide/tilt sunroof (panorama glass sunroof)





Necessary preliminary tasks:
- E53: Remove mounting bracket from roofliner at front
- E83: Remove front roofliner trim 51 44 ... - Removing and installing front roofliner trim





Note:
Secure drive with gear for actuating slide/tilt sunroof (2) against falling out.

Release screws (1), tightening torque 54 13 1AZ 54 13 Electric Components (of Sun Roof).

Lower drive with gear for actuating slide/tilt sunroof (2).

Note:
Screws (1) are microencapsulated.

Unlock plug connection (3), disconnect and remove drive with gear for actuating slide/tilt sunroof (2).





Installation:
Insert gear wheel (1) of drive with gear for actuating slide/tilt sunroof (2) exactly in gear teeth (3).





Installation:
- Initialize slide/tilt sunroof Testing and Inspection.