Removing and Installing/Replacing Side Trim Panel, Footwell, on A-Pillar, Right

51 43 075 - Removing and installing / replacing side trim panel, footwell, on A-pillar, right





Special tools required:






Necessary preliminary tasks:
- Remove front entrance cover strip (inside) 51 47 000 Removing and Installing/Replacing Front (Inside) Left or Right Entrance Cover Strip
- Remove trim for instrument panel, bottom left 51 45 181 Removing and Installing/Replacing Bottom Right Trim For Instrument Panel





Detach mucket (1) in area of side trim panel (2).
Unclip side trim panel (2) with special tool 00 9 317 in direction of arrow at retaining points (3) and remove.






Installation:
If necessary, lever out clips (1) remaining in bores.
If necessary, replace faulty clips (1).
Position side trim panel (2) preinstalled with clips (1) on associated bores and clip into place.