Removing and Installing/Replacing Support Block for Radial Compressor (BMW ALPINE B7)

11 14 ... - Removing and installing/replacing support block for radial compressor (BMW ALPINA B7)





Necessary preliminary tasks:
- Remove radial compressor Service and Repair





Release bolt (1) and remove tensioner with tension pulley (2).

Installation:
Tightening torque: 40 Nm.





Detach oil line (1).

Installation:
Replace seals.
Tightening torque: 25 Nm.

Unfasten screws (2).

Installation:
Tightening torque: 9 Nm.

Release bolt (3) and pull off support block straight towards front.

Installation:
Tightening torque: 41 Nm.





Installation:
Sealing ring (1) must always be replaced.

When the support block is replaced, the drive belt deflection pulley Removing and Installing/Replacing Radial Compressor Deflection Pulley (BMW ALPINA B7) must be modified.