51 44 013 Removing And Installing Roofliner (On Version With Panorama Sunroof)

51 44 013 - Removing and installing roofliner (on version with panorama sunroof)





Necessary preliminary tasks:
- Remove both sun visors and counter supports Service and Repair
- Remove all ceiling lights
- Remove front roofliner trim 51 44 ... - Removing and installing front roofliner trim
- Remove both trim panels for front roof pillar Removing and Installing/Replacing Panel for Roof Pillar at Front (A-Pillar), Left or Right (A-pillar trim panel)
- Remove all handles





- Remove both trim panels for top door pillar Removing and Installing/Replacing Trim on Left or Right Door Pillar (Top) (B-pillar trim panel)
Note:
Do not release seat belt screw on front seat. Guide panels (1) with lined side to seat in downward direction
- Remove both trim panels for rear roof pillar (C-pillar trim panel)
- Remove both trim panels for rear roof pillar (D-pillar trim panel)
- Remove module for passenger compartment protection Removing and Installing/Replacing Module for Passenger Compartment Protection (Version with Panorama Glass Sunroof)





If necessary, remove all four dividing net mounts (3):
Fold back cover (1) for dividing net mount (3).
Release screw (2) and remove dividing net mount (3).

Installation:
Observe position specifications on reverse side of covers (RR, FR, RL, FL).





- Move both front seat backrests as far back as possible.
- Remove roller cover for luggage compartment,
refer to Owner's Handbook.
- Fold both rear-seat backrests forward.
- Pull off mucket of front and rear doors.





Important!
The following tasks must be carried out with a second person assisting:
Support headliner at front.

Unclip clips (1) in sunroof frame area towards bottom.





Press roofliner at rear to one side and in so doing slide both guides (1) out of sliding clips in body.
Turn headliner and remove towards rear.





Installation:
Pull sliding clips (1) out of retainers in body roof lining and slide into guides (2) of headliner.
If necessary, replace metal retainers in body roof lining.





Installation:
Clips (1) and guide (2) must not be damaged.
If necessary, replace clips (1) and guide (2).