Removing and Installing/Replacing Left or Right High-Pressure Nozzle of Headlight Washer System

61 67 083 - Removing and installing/replacing left or right high-pressure nozzle of headlight cleaning system





Special tools required:
- 13 3 010 13 3 010 Hose Clip





Necessary preliminary tasks:
- Remove front bumper trim 51 11 156 Removing and Installing Front Bumper Trim





To prevent excessive escape of washer fluid, seal off end of high-pressure line with special tool 13 3 010 13 3 010 Hose Clip.





Unlock high-pressure line (1) and detach from high-pressure nozzle (2).
Release screws (3).
Remove high-pressure nozzle (2).

Installation:
New spray nozzles are already preset.
Carry out a function test before fitting bumper trim.