Removing and Installing/Replacing Push Rod (Stabilizer Link) for Left/Right Stabilizer

31 35 005 - Removing and installing/replacing push rod (stabilizer link) for left or right stabilizer (AWD)





Important!
Observe safety instructions on raising the vehicle 00 .. ... Lifting Vehicle With A Lifting Platform.

Note:
Stabilizer links may only be replaced in pairs.





Release nuts (1); if necessary, grip at Torx socket.
Remove stabilizer link (2).

Installation Note:
Replace self-locking nuts.
Tightening torque 31 35 11AZ Front Axle - Stabilizer Bar.