Removing and Installing/Replacing Drive for Head Restraint Height Adjustment on Left or Right Front Seat

67 31 570 - Removing and installing/replacing drive for head restraint height adjustment on left or right front seat





Necessary preliminary tasks:
Version without crash-active head restraint:
- Remove head restraint

- Remove rear panel on front seat backrest Removing and Installing/Replacing Rear Panel on Left or Right Front Seat Backrest (Normal/Electric).

Version with crash-active head restraint:
- Remove crash-active head restraint Removing and Installing/Replacing Front Left or Right Crash-Active Head Restraint





Pull backrest cover (1) in direction of arrow over metal lugs (2) and detach.
Detach backrest cover (1) on both sides from backrest frame.
Feed backrest cover (1) out of upper backrest frame.





Disconnect plug connection (1).
Release screws (2).
Tightening torque 67 31 3AZ [1][2]Power Seat Motor.
Feed out drive for head restraint height adjustment (3) in direction of arrow and remove.