Removing and Installing/Replacing Drive Unit for Longitudinal Seat Adjustment

67 31 500 - Removing and installing/replacing drive unit for longitudinal seat adjustment





Necessary preliminary tasks:
- Remove trims for top rail Removing and Installing/Replacing All Trims on Left or Right Seat Rails





Disconnect plug connection (1).
Release expander rivets (2).

Installation:
If necessary, replace faulty expander rivets (2).





Note:
View from rear.

Important!
Risk of damage!
Do not kink drive shafts (4).

Lever out guide clip (3).

Raise flange (1) with drive unit for longitudinal seat adjustment (2) slightly and detach from left drive shaft.
Feed out drive unit for longitudinal seat adjustment (2) in direction of arrow and detach from right drive shaft.

Installation:
Make sure guide clips (3) and both drive shafts (4) are correctly seated.





Replacement:
Initialize Programming and Relearning drive unit for longitudinal seat adjustment.