51 16 200 Removing and Installing Storage Compartment

51 16 200 - Removing and installing storage compartment





Necessary preliminary tasks:
- Remove trim for storage compartment 51 16 211 - Removing and installing/replacing finisher for storage tray
- Remove rear compartment fresh air grille Removing and Installing/Replacing Rear Cabin Fresh-Air Grille
- If necessary, remove USB/AUX connecting socket Removing and Installing/Replacing USB/Audio Interface Connecting Socket
Version with rear console:
- Remove rear console 51 16 270 - Removing and installing rear console at rear (long version)





Lever out trims (1) on left/right at rear end and pull out of storage compartment in direction of arrow.





Installation:
Retainers (1) and guide (2) on trim (3) must not be damaged or missing.





Release screws (1) on storage compartment (2).
If necessary, unlock plug connections.





Build date from 03/07:
Release screws (1).





Remove gaiter for handbrake lever.
Release screw (1) on left/right.
Raise storage compartment (2) at rear and disconnect plug connections under storage compartment (2).
Feed out storage compartment (2) in direction of arrow over handbrake lever and gear lever and remove towards rear.





Build date up to 03/07:

Installation:
Do not damage guides (2) when feeding storage compartment (1) in.