Removing and Installing/Replacing Front Controller

61 31 195 Removing and installing (replacing) front controller (until 09/2008)







IMPORTANT:
Risk of damage.
Before dismantling it make absolutely sure, whether the controller is installed with the status before or after Life Cycle Impulse (LCI).







NOTE: The number of buttons and shape of controller can vary depending on vehicle type.

Before LCI: Controller (1) has buttons on bottom only.
After LCI: Controller (2) has buttons top and bottom.

NOTE: These repair instructions describe the removal and installation (replacement) of controller (1).







Necessary preliminary tasks:
- Remove trim for storage tray
- Replacement only: Remove knob for controller

IMPORTANT:
Risk of damage.
Install knob for controller only when controller is installed.







Release screws (1).
Feed controller (2) in direction of arrow out of trim (3) and remove.







Replacement:
Carry out programming/coding.