Removing and Installing/ Replacing Switch For Passenger Airbag Deactivation

Removing and Installing/ Replacing Switch for Passenger Airbag Deactivation

Warning!
Read and comply with safety regulations for handling airbag modules and pyrotechnical belt pretensioners.
Incorrect handling can activate airbag and cause injury.

Necessary Preliminary Tasks:
- Disconnect battery negative lead, Service and Repair.
- Remove right fresh-air grill, Service and Repair






Disconnect plug connection (1).

Unlock catches (4) and feed switch for front passenger airbag deactivation (2) in direction of arrow out of instrument panel trim (3).

Installation:
- Make sure switch for front passenger airbag deactivation (2) is correctly seated in instrument panel trim (3).

Replacement:
Remove lock cylinder for passenger airbag deactivation, please refer to: