Removing and Installing/Replacing Spray Nozzles of Headlight Washer System on Left or Right (From 09/06)

61 67 045 - Removing and installing/replacing spray nozzles of headlight washer system on left or right (from 09/06)





Special tools required:
- 13 3 010 13 3 010 Hose Clip





Necessary preliminary tasks:
- Remove front bumper trim 51 11 156 - Removing and installing/replacing front bumper trim (M Technic aerodynamic kit).
- Remove cover for headlight washer system 51 11 ... - Removing and installing/replacing cover for headlight washer system on left or right (from 09/06)





To prevent excessive escape of washer fluid, seal off end of high-pressure line with special tool 13 3 010 13 3 010 Hose Clip.
Catch any escaping washer fluid if necessary.





Unlock plug connection (1) and detach high-pressure line (2) from spray nozzle for headlight washer system (3).
Release screws (5).
Remove spray nozzle for headlight washer system (3) in direction of arrow from bumper trim (6).

Installation:
Make sure guide (4) is correctly seated on bumper trim (6).
Keep plug connection (1) of high-pressure line (2) and high-pressure nozzle (3) clean and free from grease.
Make sure high-pressure line (2) is correctly engaged on spray nozzle (3).
If necessary, top up washer fluid.