Replacing Left or Right Rear Axle Carrier Compression Strut

33 33 001 - Replacing left or right rear axle carrier compression strut





Important!
Observe safety instructions 00 .. ... Lifting Vehicle With A Lifting Platform for raising the vehicle
Driving without tension and compression struts is not permitted!
Risk of damage!
The rear axle carrier must be supported at the front if both compression struts have to be replaced!





Necessary preliminary tasks:
- If necessary, remove rear tension strut
- Remove tank cover
- Version with Dynamic Drive: Disconnect pressure lines for oscillating motor of rear axle from tension strut.





Release screws (2).
Tightening torque 33 32 17AZ Control Arms And Struts (Rear).
Release bolt (1) and remove compression strut.
Secure rear axle carrier by inserting bolt (1).

Installation Note:
Check threads for damage; if necessary, repair with Heli-Coil(R) thread inserts Notes on Repairing Threads.
Tightening torque 33 33 3AZ Rear Axle Suspension.