Removing and installing (replacing) vehicle centre sensor

65 77 730 - Removing and installing (replacing) vehicle centre sensor





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Warning!
Note airbag safety instructions [1][2]Safety Regulations for Handling Components with Gas Generators!
Incorrect handling can activate airbag and cause injury.





Note:
Follow instructions for handling optical fibers 61 00 ... Notes on Handling Optical Fibers.





Necessary preliminary tasks:
- Remove luggage compartment floor trim 51 47 101 Removing and Installing/Replacing Luggage Compartment Floor Trim Panel
- Disconnect battery negative lead Instructions for Disconnecting and Connecting Battery





Disconnect plug connections (1)
Disconnect Bowden cable (2).
Press in button (3) and lift storage compartment (4) out of centre armrest.





Disconnect Bowden cable (1).

Installation Note:
Make sure Bowden cable is correctly guided.





Release screws (1).
Disconnect plug connections (2) and remove vehicle centre sensor (3).
Tightening torque 65 77 6AZ Airbag Triggering Control.





Replacement:
Carry out programming/coding Programming and Relearning.