Auxiliary Cabin Heater Transmitter: Testing and Inspection

64 12 ... - Initializing independent heating remote control





The following steps are required for initializing a new independent heating remote control or after replacing the Car Access System control unit:
-A)
- Close and then reopen central locking with vehicle remote control.
-B)
- Within 5 seconds: Switch ignition lock from terminal "0" to terminal "R" and then back to terminal "0".
-C)
- Press and hold down "OFF" button on independent heating remote control.
-D)
- Press "ON" button on independent heating remote control 3 times in succession
The vehicle's central locking closes and opens automatically on successful initialization.





Note:
Both independent heating remote controls must be reinitialized after the Car Access System control unit has been replaced.