Parking Brake Lever: Service and Repair

34 41 000 - Removing and installing / replacing handbrake lever





Special tools required:
- 32 1 030 32 1 030 Lever





Necessary preliminary tasks:
- Remove centre console 51 16 200 Removing and Installing Storage Compartment

After completing tasks, adjust parking brake Adjustments.





Lock adjuster unit (ASZE).

Actuate parking brake lever. Screw in special tool 32 1 030 32 1 030 Lever partially. Press stop (1) of adjusting spring back to such an extent that retaining hook (2) engages in stop (1).





Unclip mounting clip (1) upwards out of balance arm (2).





Guide handbrake Bowden cables (1) with a screwdriver inwards and pull out of balance bar (2).





Disconnect cable (1) from handbrake check switch.

Release screws (2) and remove parking brake lever (3).

Installation:
Tightening torque 34 41 1AZ 34 41 Parking Brake.

Parking brake lever and adjustment unit (ASZE) are only exchanged completely as a single unit.