51 16 366 - Removing and installing right glovebox with housing (without active knee protection)

51 16 366 - Removing and installing right glovebox with housing (without active knee protection)





Necessary preliminary tasks:
- Remove trim for instrument panel, bottom right 51 45 181 Removing and Installing/Replacing Bottom Right Trim For Instrument Panel





Release screws (1).
To release screws (2), release damper if necessary.
Release screws (2) and pull back glovebox with housing (3).





Disconnect Bowden cable (1).
Disconnect plug connections (2) and remove glovebox with housing (3).

Installation:
Make sure glovebox with housing (3) is correctly seated in associated mountings.