Removing and installing/replacing CD changer magazine

65 11 ... - Removing and installing/replacing CD changer magazine





Special tools required:
- 65 1 170 Tools and Equipment





Note:
Carry out the following work steps if the CD changer magazine is not automatically ejected.





Insert special tool 65 1 170 Tools and Equipment on left under CD changer magazine (1) and carefully remove special tool with CD changer magazine (1) from CD changer (2).

Installation:
Check position of CDs in CD changer magazine.





Note:
A modified CD changer magazine is available from 10/04 which eliminates incorrect loading.

Checking CD changer magazine:

Pull CD slot (1) out of CD changer (2) and check top side at retaining lugs (3) on right/left.

(A): CD changer magazine before 10/04:

No retaining lugs on right/left.

Replace CD changer magazine.

(B): CD changer magazine from 10/04:

Retaining lugs (3) present on right/left.