Replacing Water Valve for Heater (Automatic A/C High)

64 11 274 - Replacing water valve for heater (automatic A/C High)





Warning!
Danger of scalding!
Only perform this work after engine has cooled down.





Disconnect plug connection (1).

Installation Note:
Ensure correct cable routing.

Pull out heater valve (2) upwards slightly.





Release hose clamps (1) and detach water hoses.
Remove water valve for heater (2).





Installation Note:
Make sure water valve (1) is correctly seated in grommets (2) and rubber mount (3).
If necessary, replace grommets (2) and rubber mount (3).

Filling and bleeding the cooling system,