Removing and Installing/Replacing Panel for Roof Pillar at Front (A-Pillar), Left or Right

51 43 201 - Removing and installing/replacing panel for roof pillar at front (A-pillar), left or right





Special tools required:
- 00 9 317 00 9 317 Trim Panel Wedge





Warning!
Follow 51 00 ... Safety Instructions For Working on Cars With Airbag Systems safety instructions for working on vehicles with airbag systems.

Important!
Do not use any sharp-edged tools to remove trim (risk of damage to head airbag).





Lever out clip (1) with special tool 00 9 317 00 9 317 Trim Panel Wedge.

If necessary, detach mucket in area of A-pillar panel.





Release screw (1).

Installation Note:
Tightening torque 51 43 2AZ [1][2]Specifications.

Make sure clip (2) is correctly seated.





Pull out trim for front roof pillar towards inside/top.





Installation Note:
Clips (1 and 2) on instrument panel (3) must not be damaged.





Installation Note:
If necessary, replace faulty clips (1) of panel (2).





Installation Note:
If necessary, replace defective grommets (1).

Do not damage head airbag (2) during installation.