Removing and Installing Top Right Timing Case Cover (N62 / N62TU)

11 14 085 - Removing and installing top right timing case cover (N62 / N62TU)





(cylinder bank 1 to 4)

Necessary preliminary tasks:
- Remove right cylinder head cover Removing and Installing/Sealing Right Cylinder Head Cover
- Remove vacuum pump Service and Repair
- Remove both solenoid valves on right side Removing and Installing/Replacing Both Solenoid Valves on Right Side





Remove cable from holder.





Release screws (1 and 2).
Remove timing case cover (3).





Installation:
Free sealing face (2) on timing case cover (3) of seal debris and clean.





Installation:
Check adapter sleeves (1) for damage and correct installation position; replace if necessary.
Free sealing face (2) of seal debris and clean.





Installation:
Replace gasket (1) and check for correct installation position.