Removing and Installing Top Left Timing Case Cover (N62/N62TU)

11 14 080 - Removing and installing top left timing case cover (N62/N62TU)





(cylinder bank 5 to 8)

Necessary preliminary tasks:
- Remove left cylinder head cover Service and Repair.
- Remove both solenoid valves on left side Removing and Installing/Replacing Both Solenoid Valves on Left Side
- Release alternator (air-cooled)
- BMW ALPINA B7 vehicles:
- Remove support block for radial compressor





Release screw, remove holder (1).
Remove line (2) from holder.





Release screws (1 and 2).
Remove timing case cover (3).





Installation:
Free sealing face (2) on timing case cover (3) of seal debris and clean.





Installation:
Check adapter sleeves (1) for damage and correct installation position; replace if necessary.
Free sealing face (2) of seal debris and clean.





Installation:
Replace gasket (1) and check for correct installation position.