Removing and Installing Oil Pump

11 41 000 - Removing and installing oil pump (N52)





Necessary preliminary tasks:
- Removing oil pan.





Release screws (1).
Tightening torque: 11 41 1AZ 11 41 Oil Pump with Strainer and Drive.

Installation:
Replace aluminium screws.

Remove intake pipe (2) in direction of arrow.





Release screw (1).
Tightening torque: 11 41 4AZ 11 41 Oil Pump with Strainer and Drive.
Release screws (2).
Tightening torque: 11 41 3AZ 11 41 Oil Pump with Strainer and Drive.





Release screws (1).
Tightening torque: 11 41 2AZ 11 41 Oil Pump with Strainer and Drive.

Installation:
Replace aluminium screws.





Detach sprocket wheel (1) in direction of arrow.

Note:
Timing chain (3) of triangular drive is pressed upwards by chain tensioner.
Do not remove sprocket wheel.

Remove oil pump (2) in direction of arrow.





Installation:
Check spacer bushings (1) for secure seating and damage; replace if necessary.

Align twin surface (3) on oil pump (2) to sprocket wheel.

Install oil pump (2).





Assemble engine.