Front Crankshaft Seal: Service and Repair

Replacing Radial Seal In Lower Timing Case Cover
Remove vibration damper, refer to Harmonic Balancer, Service and Repair.

Note:
With the version
Vibration damper and hub for vibration damper (two parts).
Remove hub for vibration damper.





Fit special tool 11 2 383 to crankshaft.





Fit special tool 11 2 385 to crankshaft.
Align groove of special tool 11 2 385 to feather key of crankshaft.

Note: Special tool 11 2 385 centered special tool 11 2 380.





Screw in special tool 11 2 380 until it has made firm contact with radial seal.
Remove radial seal by tightening screw on special tool.





Installation:
Coat sealing lips of new radial sealing ring with oil.
Using special tool 11 3 280 and centering screw, install new radial seal flush with timing case cover.