Replacing Left Engine Support Arm (M54)

22 11 110 - Replacing left engine support arm (M54)





Necessary preliminary tasks:
- Secure engine in installation position Securing Engine In Installation Position (M54).
- Remove suction filter housing Service and Repair.
- Remove intake hose Service and Repair.





Disconnect return hose (1) from cyclone filter on oil separator.
Release screw (2) and turn dipstick (3) to one side.





Release nut (1) on engine mount.
Tightening torque 22 11 2AZ Specifications.





Release screws and remove engine support arm (1).
Tightening torque 22 11 3AZ Specifications.