Compartment Lid Lock

Removing and installing or replacing convertible top lid lock

Note:
- Open side windows.
- Unlock soft top and raise over dead center.
- Remove actuating handle, Handle
- Remove strip on convertible top lid lock, Replacing Trim on Convertible Top Lock






Unfasten screws and nuts (1) and remove convertible top lid lock.






Adjustment:
- Screw on handle and close convertible top lid.
- Lid should close flush with windshield.






- Unscrew nuts (1) and (2).
- Adjust height using adjusting screw (3).
- Tighten nuts (1) and (2).
- If applicable, adjust base plates, Replacing the Base Plate on Left or Right