Windshield Washer Spray Nozzle: Service and Repair

Windshield Spray Nozzles

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing






- Unclip washer fluid nozzles from bottom of hood - arrow -.

- Release securing clip - 2 - in - direction of arrow - and remove washer fluid line - 1 - at windshield washer system spray jet.






- Disconnect electrical harness connector - 3 -, if present.

Installing

Install in reverse order of removal. Note the following:

- When connector washer fluid hose, ensure securing clip engages audibly in washer fluid line connection.

- Insert nozzle in hood.