Steering Column Switch Module Overview

Steering Column Switch Module Overview






1 - Screw

• 0.4 Nm

4 - Steering Angle Sensor (G85)

• Removing and installing, refer to => [ Steering Angle Sensor (G85) ] Steering Angle Sensor (G85).

5 - Transport Protection

• To secure coil connector with slip ring in center position.

6 - Coil Connector With Slip Ring

• Removing and installing, refer to => [ Airbag Spiral Spring/Return Spring With Slip Ring ] Airbag Spiral Spring/Return Spring With Slip Ring.

Risk of damaging coil connector.

• Coil connector with slip ring is not to be turned following removal.

7 - Turn Signal Switch (E2)

• On vehicles with cruise control: with auxiliary Cruise Control Switch (E45).

• Removing and installing, refer to => [ Turn Signal Switch (E2), Cruise Control Switch (E45) ] Turn Signal Switch (E2), Cruise Control Switch (E45).

8 - Windshield Wiper/Washer Switch (E22)

• Removing and installing, refer to => [ Windshield Wiper/Washer Switch (E22) ] Windshield Wiper/Washer Switch (E22).

11 - Mount

15 - Steering Column Electronic Systems Control Module (J527)

• Removing and installing, refer to => [ Steering Column Electronic Systems Control Module (J527) ] Steering Column Electronic Systems Control Module (J527).

• Connector assignment of Steering Column Electronic Systems Control Module (J527). Refer to => [ Steering Column Electronic Systems Control Module (J527) Connector Assignment ] [1][2]Diagrams.