Diagram 22/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Data Bus On Board Diagnostic Interface, Instrument Cluster Control Module, CAN-Bus Wiring





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument Cluster Control Module Component Locations

J519 - Vehicle Electrical System Control Module Component Locations

J533 - Data Bus On Board Diagnostic Interface Component Locations

T12e - 12-Pin Connector, black (Connector G), on vehicle electrical system control module

T16 - 16-Pin Connector, Diagnostic Connector

T20d - 20-Pin Connector, black, on data bus on board diagnostic interface

T32 - 32-Pin Connector, blue, on instrument cluster control module

T52c - 52-Pin Connector, brown, on vehicle electrical system control module

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

(B415) - Infotainment CAN-Bus High Connection 1 (in main wiring harness)

(B421) - Infotainment CAN-Bus Low Connection 1 (in main wiring harness)

^ - CAN-Bus (data wire)

* - Wake Up Wire

# - Through May 2009

## - from June 2009

Previous Diagram 22/5 (Tracks 43-56)