Outer Belt End Fitting

Outer Belt End Fitting

Removing






- Move seat forward and fold backrest forward.

- Pull the cover - 2 - in direction of - arrow - and open it.

- Remove cover - 2 - upward out of floor covering.

- Remove bolt - 1 -.

Installation

- Install bolt - 1 -.

- When installing, slide tab - 4 - under floor covering.

- Press tabs - 3 - under floor covering by closing cover - 2 -.

For the correct tightening specifications; refer to => [ Three-Point Seat Belt Assembly Overview ] Three-Point Seat Belt Assembly Overview.