Diagram 5/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag Control Module, Driver's Safety Belt Switch, Driver's and Front Passenger's Side Airbag Crash Sensor, Front Airbag Crash Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver's Safety Belt Switch

G179 - Driver's Side Airbag Crash Sensor Door Routing

G180 - Front Passenger's Side Airbag Crash Sensor Door Routing

G190 - Front Airbag Crash Sensor Plenum chamber, engine compartment routing

J234 - Airbag Control Module Component Locations

T2p - Double Connector, yellow, front center engine compartment

T2q - Double Connector, yellow, in driver's door

T2r - Double Connector, yellow, in front passenger's door

T2aa - Double Connector, in driver seat

T10h - 10-Pin Connector, black, below driver's seat Overview of connector stations and pin connectors

T20a - 20-Pin Connector, black, on front left door Door Routing

T20b - 20-Pin Connector, black, on front right door

T75 - 75-Pin Connector, yellow, on airbag control module

(383) - Ground Connection 18 (in main wiring harness)

* - Through May 2009

** - from June 2009

Previous Diagram 5/4 (Tracks 29-42)

Next Diagram 5/6 (Tracks 57-70)