Navigation Module: Service and Repair

Radio/Navigation Display Control Module

Special tools, testers and auxiliary items required

• Radio Removal Tool (T10057)

- If control module is replaced, select Replacement function for appropriate control module in Guided Fault-Finding routine.

Use the Vehicle Diagnosis, Testing and Information System to do so.

- Switch off all electrical consumers.

- Remove the key.

Removing

- Place radio removal tool - arrows - in release slits on radio/navigation display control module until they engage. Points on grip eyes face outward.





- Remove radio/navigation display control module from instrument panel using grip eyes on radio removal tool.

- Release electrical connectors on radio/navigation display control module and remove it.

- Remove radio removal tool by pressing locking tabs on radio/navigation display control module.

- Remove front passenger's airbag disabled indicator lamp. Refer to => [ Front Passenger Airbag Disabled Indicator Lamp ] Front Passenger Airbag Disabled Indicator Lamp.

Installing

- Install front passenger's airbag disabled indicator lamp. Refer to => [ Front Passenger Airbag Disabled Indicator Lamp ] Front Passenger Airbag Disabled Indicator Lamp.

- Connect all electrical connectors.

- Slide radio/navigation display control module straight into instrument panel until it engages in installation frame.