Ignition Coil: Service and Repair

Ignition Coils with Power Output Stages

Special tools, testers and auxiliary items required

• Ignition Coil Puller (T40039)

Removing

- Remove both bolts - 1 - of the connector strip.





- Pull all ignition coils approximately 30 mm out of spark plug shaft using ignition coil puller (T40039).





- Release connectors and pull all connectors simultaneously off from the ignition coils.





Installing

- Insert all ignition coils loosely into spark plug shaft.

- Align the ignition coils to the connectors and then connect all of the connectors simultaneously onto the ignition coils.





- Press the ignition coils uniformly onto the spark plugs by hand (do not use an impact tool).