Turbocharger Vacuum Diaphragm

Turbocharger Vacuum Diaphragm

Removing

- Remove the turbocharger. Refer to => [ Turbocharger ] Turbocharger.

- Remove the linkage securing plate - 2 -.






- Remove the nut - 3 - and the bolts - 1 -.

- Remove the pressure hose - arrow - and the vacuum diaphragm.

Installing

• For the correct tightening specifications, refer to => [ Turbocharger Overview ] Turbocharger Overview.

Installation is done is reverse order, observe the following:

- Adjust the turbocharger vacuum diaphragm. Refer to => [ Turbocharger Vacuum Diaphragm, Adjusting ] Adjustments.

- Install the turbocharger. Refer to => [ Turbocharger ] Turbocharger.