Turbocharger Air Intake Hose: Service and Repair

Air Guide Pipes and Hoses with Connector Coupling

Removing

- Release the retaining tab - A - on the connector coupling by pulling the securing clip - arrow -.






- Do not use tools to separate the air guide pipes and hoses.

Installing

• Replace the sealing ring if it is damaged.

• The hose supports, air guide pipes and hoses must be free of oil and grease before installing.

• Make sure the sealing ring sits completely in the groove all around the air guide pipe/hose.

• Coat the sealing surface and the sealing ring with silicone-free lubricant.

- Pull the securing clip into the release position - 1 -.






- Insert the air guide pipe/hose as far as the stop and press the securing clip into the locked position - 2 -.

- Press the air guide pipe/hose on and pull on it to make sure the connection is engaged correctly.