Central Locking -SAFE- Indicator Lamp (K133)

Central Locking -SAFE- Indicator Lamp (K133)

Removing






- Switch ignition off.

- Remove the center speaker trim. Refer to Instrument Panel.

- Carefully remove the Central locking SAFE indicator lamp - B - from the upper defroster vent in the center.

- Disconnect the 2-pin connector.

• The sunlight photo sensor (G107) - A - has a 4-pin connector that looks the same.

Installing

Install in reverse order of removal. Note the following:

- Install the center speaker trim. Refer to Instrument Panel.