Diagram 60/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Battery, Starter, Battery monitoring control module, Battery interrupt igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery Harness Locations

B - Starter

J104 - ABS control module Component Locations

J234 - Airbag control module Component Locations

J367 - Battery monitoring control module

J682 - Terminal 50 power supply relay Relay carrier behind left instrument panel, left-hand drive

N253 - Battery interrupt igniter Harness Locations

SD1 - Fuse 1 (on fuse panel D) Fuses (SD) on Main Fuse Carrier

SD2 - Fuse 2 (on fuse panel D) Fuses (SD) on Main Fuse Carrier

SD3 - Fuse 3 (on fuse panel D) Fuses (SD) on Main Fuse Carrier

T2au - Double connector

T2b - Double connector

T47 - 47-pin connector

T75 - 75-pin connector

U6 - Battery jump start terminal

(40) - Ground connection under right rear bench seat Locations

(B299) - Positive connection 3 (30) (in main wiring harness)

(B301) - Positive connection 5 (30) (in main wiring harness)

(P2) - Positive connection (30) (in battery wiring harness)

(P4) - Positive connection 2 (30) (in battery wiring harness)

* - Main fuse box in the right rear luggage compartment, at the battery

*2 - Refer to applicable standard equipment wiring diagram

*3 - Only for vehicles with battery jump start terminal

Next Diagram 60/3 (Tracks 15-28)