Parking Brake Handle Trim, Vehicles with Center Armrest

Parking Brake Handle Trim, Vehicles with Center Armrest

Removing






- Remove upholstery bracket. Refer to => [ Upholstery Bracket ] Upholstery Bracket.

- Pull the parking brake up as far as possible.

- Pierce through seam on parking brake handle at place shown in illustration using a small screwdriver - 2 -.

- Release clip underneath and remove parking brake handle trim - 1 - forward - arrow -.

Installation

Install in reverse order of removal. Note the following:

- Make sure the parking brake handle trim engages audibly.