Brake Pedal and Brake Booster, Separating

Brake Pedal and Brake Booster, Separating

Special tools, testers and auxiliary items required

• Release tool (T40024)

Separating

- Remove the driver side storage tray.

- Disconnect the brake pedal from the brake booster using (T40024).






- Guide in the (T40024) and press together, while pulling brake pedal toward the driver seat. (The brake pedal will thereby be pulled off the ball head of the push rod.)

Installing

Clip brake pedal to brake booster push rod ball head.






- Hold ball head of push rod in front of mounting and push brake pedal in direction of brake booster, so the ball head locates audibly.

- Install the driver side storage tray.

Make sure the brakes are working correctly before driving the vehicle for the first time.