Upper Steering Column Switch Trim

Upper Steering Column Switch Trim

Removing






- Position steering wheel so that it is as far rearward and down as possible, using full adjustment range of steering column adjuster.

- Remove gap cover - 2 - in direction of - arrow A -.

- Pull upper steering column switch trim - 1 - up - B arrows -.

- Disengage upper trim at lower steering column switch trim.

Installation






Install in reverse order of removal. Note the following:

- Next, engage upper trim in lower trim - arrow 1 -.

- Make sure the lower trim pins engage in opening at upper trim retaining tab - arrow 2 -.

• Shown on removed steering column switch trim in the illustration.

- Engage gap cover on instrument cluster.