Rear Side Trim Panel, After July 2011, Installing

Rear Side Trim Panel, after July 2011, Installing

• Depending on country.

• The rear side trim panel replacement part is delivered without holes for the trim.

• The holes must be inserted later during installation.

Special tools, testers and auxiliary items required

• Drill

• 6.5 mm drill bit

Procedure






- Position the trim - 1 - on the rear side trim panel - 2 - so that the contours are covered.

- Secure the trim to the side trim panel with adhesive tape - arrows -.

- Insert 4 holes 6.5 mm in diameter through the trim and into the side trim panel.

- Secure the trim - 2 - with 4 for expanding clips - 1 -.






- Carefully remove the adhesive tape.