Alarm Horn: Service and Repair

Alarm Horn (H12)

Removing






- Remove front right wheel housing liner.

- Open hood and remove sealing plugs - 1 - from fender - arrow -.

- Guide a wrench through the opening in the fender and remove nut - arrow -.






- Disengage protective housing - 2 - with Alarm Horn on bracket - 1 -.

- Slide Alarm Horn - item 1 - in - direction of arrow - from protective housing - 3 -.






- Disconnect electrical connector - 2 -.

Installing

• Tightening specification, refer to => [ Ultrasonic Interior Monitoring Overview ] Service and Repair.

Install in reverse order of removal. Note the following:

- Engage retaining tab in opening on bracket.