Wastegate Actuator: Service and Repair

Turbocharger Vacuum Diaphragm

Removing

- Remove the turbocharger => [ Part IV ] Turbocharger Overview.

- Remove securing plate - 1 - over linkage on turbocharger.






- Loosen lock nut - 2 -.






- Disconnect linkage from turbocharger - 3 -.

- Disconnect vacuum diaphragm - 1 - and remove bolts - 4 -.

Installing

Installation is carried out in the reverse order while noting the following:

• For the correct tightening specifications, refer to => [ Turbocharger Overview ] Turbocharger Overview.

- Adjust the turbocharger vacuum diaphragm. Refer to => [ Turbocharger Vacuum Diaphragm, Adjusting ] Adjustments.

- Install the turbocharger. Refer to => [ Turbocharger ] Turbocharger.