Oil Separator: Service and Repair

Oil Separator

Removing

- Remove the noise insulation.

- Remove the frame for the noise insulation.

- Remove the bolts - 1 through 9 - and remove the oil separator.






Risk of contaminating lubricating system.

• Seal the opening with a clean cloth.

Installing

• Always replace gaskets and seals.

• Secure all the hose connections with hose clamps appropriate for the model. Refer to the Electronic Parts Catalog (ETKA).

Install in reverse order of removal. Note the following:

- Oil separator tightening sequence, refer to => [ Oil Separator, Tightening Sequence ] Oil Pan and Oil Pump Overview.