Wiper Blade: Service and Repair

Wiper Blades, Replacing

Removing






- Bring windshield wipers into the service position. Refer to => [ Bringing Wipers into Service Position ] Testing and Inspection.

- Lift up the wiper arm from the windshield.

- Press the retaining clip - arrow A -.

- Push the wiper blade - 1 - off the wiper arm - 2 - in direction of - arrow B -.

- Remove the wiper blade.

Installing

There is a risk of damaging the body.

• The driver and passenger side wiper blades are different lengths.

Install in reverse order of removal, observing the following:

- Guide the wiper blade - 1 - parallel into the wiper arm - 2 - in the - direction of the arrow -. Slide the wiper blade on until the retaining clips engage in the wiper arm.






- If the windshield wiper switch is operated or a speed of 6 km/h (4 mph) is exceeded, the wipers leave the "service position".