Selector Mechanism Overview
Selector Mechanism Overview
There is a risk of injury and accident from accidentally engaging a gear when the engine is running.
• Before work is done with the engine running, move the selector lever into "P" and press the parking brake button to engage the electromechanical parking brake.
Before disassembling the selector mechanism, perform check. Refer to => [ Selector Mechanism, Checking ] Procedures.
1 Selector Lever Handle
• => [ Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview for Vehicles through MY 2011, without Audi RS5 ] Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview For Vehicles Through MY 2011, With or => [ Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview for Vehicles from MY 2012 and Audi RS5 ] Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview For Vehicles From MY 2012 and Audi
2 Decorative Ring
• => [ Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview for Vehicles through MY 2011, without Audi RS5 ] Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview For Vehicles Through MY 2011, With or => [ Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview for Vehicles from MY 2012 and Audi RS5 ] Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview For Vehicles From MY 2012 and Audi
3 Selector Lever Boot
• => [ Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview for Vehicles through MY 2011, without Audi RS5 ] Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview For Vehicles Through MY 2011, With or => [ Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview for Vehicles from MY 2012 and Audi RS5 ] Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview For Vehicles From MY 2012 and Audi
4 Clip
• => [ Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview for Vehicles through MY 2011, without Audi RS5 ] Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview For Vehicles Through MY 2011, With or => [ Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview for Vehicles from MY 2012 and Audi RS5 ] Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview For Vehicles From MY 2012 and Audi
5 Selector Lever Transmission Range Position Display Unit (Y26)
• => [ Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview for Vehicles through MY 2011, without Audi RS5 ] Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview For Vehicles Through MY 2011, With or => [ Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview for Vehicles from MY 2012 and Audi RS5 ] Selector Lever Handle Selector Lever Transmission Range Position Display Unit (Y26) Overview For Vehicles From MY 2012 and Audi
6 Nut
• 10 Nm
• Quantity: 4
• For securing the shift mechanism to the body
7 Gasket
8 Selector Lever Sensor System Control Module (J587) with Tiptronic Switch (F189)
• => [ Selector Lever Sensor System Control Module (J587) ] Selector Lever Sensor System Control Module (J587)
9 Selector Mechanism Function Unit
• Can only be replaced as a unit
• Removing and installing, refer to => [ Shift Mechanism Function Unit ] Shift Mechanism Function Unit
• Perform "Guided Functions" using the vehicle diagnostic tester after removing and installing the selector mechanism function unit. Refer to => [ Transmission Guided Functions ] Transmission Guided Functions.
10 Shift Lock Solenoid (N110)
• Removing and installing, refer to => [ Shift Lock Solenoid (N110) ] Service and Repair
11 Transmission Park Selector Switch (F305)
• Consists of two micro-switches on the circuit board on the shift lock solenoid
• Can only be replaced together with the shift lock solenoid => [ Shift Lock Solenoid (N110) ] Service and Repair
12 Noise Insulation
• Not installed on all vehicles
• For the correct allocation, refer to the Parts Catalog
13 Lock Washers
• Replace
• Quantity: 4
• For attaching the noise insulation to the selector mechanism function unit
14 Clip
• Secure the selector lever cable to the selector mechanism function unit
15 O-ring
• Replace
16 Selector Lever Cable
• Do not bend
• => [ Selector Lever Cable Overview ] Selector Lever Cable Overview
17 Cover
• Over the shift lock solenoid