Instrument Panel CAN Cut Off Connector Mount

Instrument Panel CAN Cut Off Connector Mount

Removing






- Remove the glove compartment.

- Remove the instrument panel CAN cut off connector (T46s). Refer to => [ Instrument Panel CAN Cut Off Connector ] Instrument Panel CAN Cut Off Connector.

- Slide the locking lever - 2 - into the "open" position - arrow -.

- Press the release - 1 - and press the mount - 3 - for the instrument panel CAN cut off connector back.

Installing






Install in reverse order of removal, observing the following:

- Slide the locking lever - 1 - on the mount into the "closed" position.

• Both markings - arrows - must align.

- Install the instrument panel CAN cut off connector. Refer to => [ Instrument Panel CAN Cut Off Connector ] Instrument Panel CAN Cut Off Connector.

- Install the glove compartment.