Rear Belt Latch

Rear Belt Latch

• Removal and installation are same for right and left.

Removing






- Remove the rear bench seat. Refer to => [ Bench Seat ] Bench Seat.

- Open the seat belt latch cover - 3 - and remove it.

- Remove the nut - 2 - and the rear seat belt latch - 1 -.

Installing

Installation is reverse of removal, but note the following:

- Replace the nut for the seat belt latch.

- Align the seat belt latch to the direction of travel when bolting it on.

For the correct tightening specifications, refer to => [ Rear Belt Latch Assembly Overview ] Rear Belt Latch Assembly Overview.